topic Re: OS> in ICX Switches

OS>

1Roeun — Sun, 23 Jul 2023 00:38:18 GMT

Hello all,

I tried to upgrade my ruckus icx7150 48 port switch and everything took but then when I did a reload the boot loader came up. Then it got stuck and I am look at the CLI with OS>
I’ve looked into this and can’t find anything to resolve the issue.

Re: OS>

happytohelp — Sun, 23 Jul 2023 07:49:40 GMT

Hi 1Roeun,

Please try "reset" at the OS prompt and see if the switch recovers.

Re: OS>

Zairah — Tue, 22 Aug 2023 02:22:55 GMT

@1Roeun

Please perform the software recovery process mentioned in below document:

https://docs.commscope.com/bundle/fastiron-09010-upgradeguide/page/GUID-9B5D5A56-039D-44FB-8FD2-B9B55E71ADE8.html

Regards,

Zairah Javeed
Sr Technical Support Engineer | L2 TAC Wired
support.ruckuswireless.com/contact-us

COMMSCOPE
now meets next

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS

Re: OS>

Chandini — Fri, 08 Dec 2023 10:03:28 GMT

Hi 1Roeun

Adding to the post below is a link for software recovery using detailed steps.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/td-p/47483

Thanks