ICX 7450 copy config by SNMP

PedroS63 — Wed, 22 Nov 2023 19:24:47 GMT

Hello, i have ICX 7450-48 with firmware SPR08030u.bin and ICX 7450-24 with firmware SPR08095j.bin. In oldest firmware i can copy config over TFTP by this command:

snmpset -v 2c -c <community> 192.168.0.1 1.3.6.1.4.1.1991.1.1.2.1.65.0 i 1 1.3.6.1.4.1.1991.1.1.2.1.8.0 s switch-config.cfg 1.3.6.1.4.1.1991.1.1.2.1.66.0 x C0A80002 1.3.6.1.4.1.1991.1.1.2.1.9.0 i 20

With newer firmware, the command returns the usual responses, but the file is not actually sent to the TFTP server. If I enter the "copy startup-config tftp" server command directly in the switch, the file is sent correctly. Is there any difference between these firmwares regarding this?

Re: ICX 7450 copy config by SNMP

Mayank — Fri, 24 Nov 2023 10:02:07 GMT

Hi PedroS63 ,

Thank you for posting you query !!!

I understand that in SPR08095J.BIN you are not able to copy config over TFTP, but in SPR08030u you are able to .

I have a question for you here :

Since the MIB vary from one firmware to another are using the correct MIB for firmware SPR8095J.

You can refer the below links 08095j mib guide for your ref :

https://ruckus-support.s3.amazonaws.com/private/documents/3463/fastiron-08095-mibreference.pdf?AWSAccessKeyId=AKIAJM3QLNNKLOV235TQ&Expires=1700819860&Signature=T598IWeKP3uDC33DxUS36Gl03Bw%3D

https://support.ruckuswireless.com/software/3648-ruckus-icx-fastiron-08-0-95j-ga-software-release-zip

Moving Forward If this issue is not resolved , Please log a ticket with the below link so that we will help you further

I hope this information helps you

Please feel free to leave us a message if any concerns

Thanks

topic Re: ICX 7450 copy config by SNMP in ICX Switches

ICX 7450 copy config by SNMP

Re: ICX 7450 copy config by SNMP