topic Re: ICX7250 default vlan can't be removed from any ports? in ICX Switches

ICX7250 default vlan can't be removed from any ports?

dm — Wed, 08 Nov 2023 21:06:22 GMT

I have an ICX7250 , it has default vlan 1, I've added two new vlans 991 and 999, and I can add and tag vlans to ports but I can't remove the default vlan 1 from any of the ports ???

ICX7250-48P Router(config-if-e1000-1/1/48)#vlan-config remove vlan 1
Error - Port 1/1/48 membership removal not applicable for default VLAN id.
Port(s) ethe 1/1/48 can not be removed from VLANs 1

ICX7250-48P Router(config-if-e1000-1/1/1)#vlan-config remove all
Port(s) ethe 1/1/1 can not be removed from VLANs 1

Why not??? I don't want the default vlan to be a member of my trunk ports/uplink ports! Actually, I don't want Vlan 1 at all.

ICX7250-48P Router(config)#no vlan 1
Error - Default VLAN [1] cannot be deleted

SW: Version 08.0.95mT213
UNIT 1: SL 1: ICX7250-48P POE 48-port Management Module

Re: ICX7250 default vlan can't be removed from any ports?

BenBeck — Wed, 08 Nov 2023 21:11:52 GMT

If you want to remove ports from the default vlan, it would look like this assuming vlan 1:

conf t

vlan 1

no untagged eth 1/1/1 to 1/1/48 (add ports as needed)

Re: ICX7250 default vlan can't be removed from any ports?

dm — Thu, 09 Nov 2023 15:33:43 GMT

Thank you this worked! I'm rather new to Brocade stuff so I was getting frustrated!