https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7450-PoE-always-on-option/m-p/16474#M494 This is not currently an option. We enable POE by default on 8070+, but POE will flap upon reboot. You could put in an RFE (request for enhancement) with your account team and it could be considered for future releases/models. Thu, 02 Jan 2020 23:47:11 GMT BenBeck 2020-01-02T23:47:11Z https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7450-PoE-always-on-option/m-p/16473#M493 Recently moved over from a Juniper EX4300 series switch and the only feature I'm missing is the ability to keep PoE ports powered up during reboots. I have a number of PoE devices that I'd like to keep powered during reboots, AP's, NTP clocks, IoT devices and Raspberry Pi's etc. Not that I expect to reboot often once the initial config is done but it was handy on the Juniper from time to time.  Thu, 02 Jan 2020 21:26:14 GMT https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7450-PoE-always-on-option/m-p/16473#M493 b8 2020-01-02T21:26:14Z https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7450-PoE-always-on-option/m-p/16474#M494 This is not currently an option. We enable POE by default on 8070+, but POE will flap upon reboot. You could put in an RFE (request for enhancement) with your account team and it could be considered for future releases/models. Thu, 02 Jan 2020 23:47:11 GMT https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7450-PoE-always-on-option/m-p/16474#M494 BenBeck 2020-01-02T23:47:11Z