topic Re: Configure Ports of ICX8200 in SmartZone v-SZe in ICX Switches

Configure Ports of ICX8200 in SmartZone v-SZe

peter_riederer_ — Tue, 31 Oct 2023 12:05:29 GMT

Hey Folks,

is there special trick configuring Ethernet Ports in SmartZone v-SZe Controller?
When i select a Port and click "Configure" we always get this error:

What I am missing?

Regards

Peter

Re: Configure Ports of ICX8200 in SmartZone v-SZe

Chandini — Tue, 31 Oct 2023 12:59:47 GMT

Hi Peter_riederer_

Thank you for reaching us.

The port speed you are trying to change speed on is it a single port or is it in Lag ?
Could you please help with output of "show int e <port number>" output from the switch ?

Thanks

Re: Configure Ports of ICX8200 in SmartZone v-SZe

peter_riederer_ — Tue, 31 Oct 2023 13:09:36 GMT

Hello Chandini,

the Switch is just fresh out of the box. There is no configuration on any port so far.
IP via DHCP, SmartZone Management enabled and Firmware-Update to the latest Version.

i thought i will be able to configure the vlans to the port bei clicking "Configure"

Regards

Peter

Re: Configure Ports of ICX8200 in SmartZone v-SZe

Chandini — Tue, 31 Oct 2023 14:24:51 GMT

Hi Peter_riederer_

Ack and Thanks for reverting.

Correct you should be able to view port settings when you click "Configure" options.

Link reference:

https://docs.commscope.com/bundle/sz-522-adminguide-sz100vsz/page/GUID-85139C4E-C548-4B1B-931F-B77C6D264440.html

Could you help me with below information:

Could you please let me know if you are able to take CLI access of the switch from SmartZone ?
Which SmartZone version are you running ?
I see that switch is 8200 and is it on 10.0.10a ?

Thanks

Re: Configure Ports of ICX8200 in SmartZone v-SZe

peter_riederer_ — Tue, 31 Oct 2023 14:30:13 GMT

we are using v-SZe with:
Controller Version 6.1.1.0.959
Control Plane Software Version 6.1.1.0.446
AP Firmware Version 6.1.1.0.1274
Switch Firmware: RDR10010a_cd3

Cli is working without any issues from v-SZe

Re: Configure Ports of ICX8200 in SmartZone v-SZe

Chandini — Tue, 31 Oct 2023 17:02:04 GMT

Hi Peter_riederer_

Ack and Thanks for reverting.

Please log a SmartZone case with us. More troubleshooting would be needed to understand the cause from SmartZone side.

Please use the below link to reach out to us for logging a case:

https://support.ruckuswireless.com/contact-us

Thanks

Re: Configure Ports of ICX8200 in SmartZone v-SZe

James — Fri, 04 Oct 2024 06:07:12 GMT

Hi Peter,

This issue has fixed on vSZ versions 6.1.2.0.x and 7.0.0.