https://community.ruckuswireless.com/t5/ICX-Switches/icx7450-rate-limit/m-p/44281#M4907 <P>Hi,</P><P>Does "rate-limit output shaping.." option on interface ethernet can be set for Layer 1?</P><P>(as I see its effect Layer2)</P> Tue, 08 Mar 2022 06:16:20 GMT Tim 2022-03-08T06:16:20Z https://community.ruckuswireless.com/t5/ICX-Switches/icx7450-rate-limit/m-p/44281#M4907 <P>Hi,</P><P>Does "rate-limit output shaping.." option on interface ethernet can be set for Layer 1?</P><P>(as I see its effect Layer2)</P> Tue, 08 Mar 2022 06:16:20 GMT https://community.ruckuswireless.com/t5/ICX-Switches/icx7450-rate-limit/m-p/44281#M4907 Tim 2022-03-08T06:16:20Z https://community.ruckuswireless.com/t5/ICX-Switches/icx7450-rate-limit/m-p/44341#M4908 <P>Hello Tim,&nbsp;</P><P>I cannot be done. The packets get into the switch's port at Layer 1 and then the shaping is applied.</P> Wed, 16 Mar 2022 00:04:43 GMT https://community.ruckuswireless.com/t5/ICX-Switches/icx7450-rate-limit/m-p/44341#M4908 Orlando_Elias 2022-03-16T00:04:43Z