replacing dead switch in smartzone management

jay_tarbox — Wed, 16 Aug 2023 13:38:10 GMT

I already asked this in the SZ forum, thought I'd post it here too and maybe get better traction.

We had a switch die (a 7150), what's the process to put the new one in the Smartzone in place of the old one?

Just slap the IP back on the the switch and register it? Delete the old one first?

Re: replacing dead switch in smartzone management

Chandini — Thu, 17 Aug 2023 11:28:07 GMT

Hi Jay

Thank you for reaching us.

You are correct you will be adding this switch as new switch to the SmartZone and then do the settings you are looking forward to configure on the switch or you can move the switch to the folder you want to move in the SmartZone based on your requirement.

Also make to verify the below:

SmartZone version
Switch firmware version

I have mentioned a link below for your reference that has all details you need to bring the switch up in SmartZone.

Link for 5.2.2 SZ:

https://docs.commscope.com/bundle/sz-522-adminguide-sz300vsz/page/GUID-5BBD5D8A-8763-40DB-A51E-2EE04AC8B1F7.html

Link to 6.1.1 SZ:

https://docs.commscope.com/bundle/sz-611-switchmanagementguide-sz300vszh/page/GUID-5BBD5D8A-8763-40DB-A51E-2EE04AC8B1F7.html

I hope the above details helps you.

Thanks

topic Re: replacing dead switch in smartzone management in ICX Switches

replacing dead switch in smartzone management

Re: replacing dead switch in smartzone management