POE devices resetting on some ports saying PD overload

josue_jimenez_c — Thu, 20 Jul 2023 19:23:07 GMT

POE devices resetting on some ports

APs are working fine with power-by-class 1, however, if the Poe device needs more power, it will reset and will trigger this PD overload log.

show inline power emesg

Show log

Show inline power

According with this document

And since the Poe devices needs more power, they go to the state

The solution would be to adjust the configuration at the port level configuration mode

The solution would be configure the port with the right power class.

test(config-if-e1000-1/1/2)#int e 1/1/2 e 1/1/3

test(config-mif-1/1/2-1/1/3)#inline power power-by-class 3

Please look at this document to check the configuration details.

test(config-mif-1/1/2-1/1/3)#sh inli power | inc 2P

1/1/2 On On 6167 15400 2P-IEEE Class 4 3 n/a

1/1/3 On On 6445 15400 2P-IEEE Class 4 3 n/a

test(config-mif-1/1/2-1/1/3)#

topic POE devices resetting on some ports saying PD overload in ICX Switches