ICX 8200 firmware auto upgrade on boot

dawidku — Wed, 21 Jun 2023 11:40:08 GMT

Hello folks

Do the ICX 8200 switches support auto upgrade via dhcp options/pxe ?

Apparently on Cisco you can define the firmware so whenever it boots up, it gets the firmware and upgrades on its own?
We have a tens of switches on order and auto firmware upgrade would help a lot with initial setup.

Re: ICX 8200 firmware auto upgrade on boot

Chandini — Wed, 21 Jun 2023 17:16:00 GMT

Hi Team

Using DHCP options / pxe I tried looking into below guides and could not find such options. I have mentioned the link below so that you can refer and revert if any concerns.

Link to Features and Standards Support Matrix document:

https://support.ruckuswireless.com/documents/4295-fastiron-10-0-00-ga-features-and-standards-support-matrix

Link to Management Configuration Guide :

https://support.ruckuswireless.com/documents/4308-fastiron-10-0-00-ga-management-configuration-guide

Link to Software Upgrade Guide :

https://support.ruckuswireless.com/documents/4298-fastiron-10-0-00-ga-software-upgrade-guide

Also would you be able to share the links available to public of cisco using dhcp option feature for auto upgrade , so that I can refer and check internally.

I hope this helps.

Thanks

topic Re: ICX 8200 firmware auto upgrade on boot in ICX Switches

ICX 8200 firmware auto upgrade on boot

Re: ICX 8200 firmware auto upgrade on boot