topic Re: power supply input voltage change in ICX Switches

power supply input voltage change

wpfleeger — Tue, 06 Jun 2023 22:14:32 GMT

We are upgrading our network power structure from 120v to 208v Is there anything I need to do to the ICX 7150-48PF before plugging it in to the new power supply? I do not see a selector switch like older switches used to have.

Re: power supply input voltage change

Chandini — Wed, 07 Jun 2023 08:52:29 GMT

Hi Wpfleeger

Thank you for reaching us.

Please refer the below link of Hardware installation guide for more details on 7150 switch installation, do's and don'ts. I hope this helps.

Link :

https://support.ruckuswireless.com/documents/1397-ruckus-icx-7150-switch-hardware-installation-guide

Thanks

Re: power supply input voltage change

wpfleeger — Wed, 07 Jun 2023 14:18:33 GMT

Thank you for replying. While this document tells me that the device is capable of running at both100v and 200v I do not see where it mentions any diferences in configuration between the two. I would imagine that means the devices are hot swapable between different power sources (the power supply auto-negotiates between different voltage) I hope I am correct in that assumption.

Re: power supply input voltage change

Chandini — Fri, 09 Jun 2023 17:06:30 GMT

Hi Wpfleeger

Thank you for reverting.

From the pic attached below the 7150s do have a note on the back of the switch saying ‘AC Input Rating 100v to 240v’ (as below for a 7150-48PF). The hardware installation guide has this information as well.

I hope this helps answer your question.

Thanks