topic Re: I think unsupported 25G transceivers are "checked" to ICX7550 and ICX7650 in Optics Da in ICX Switches

I think unsupported 25G transceivers are "checked" to ICX7550 and ICX7650 in Optics Datasheet.

naoki_sato — Fri, 07 Apr 2023 00:17:44 GMT

I found some mistake in "RUCKUS® ETHERNET OPTICS" document.
I'm sure that ICX7550 and ICX7650 do not support 25G transceivers.
- E25G-SFP28-SR
- E25G-SFP28-LR

RUCKUS® ETHERNET OPTICS
https://www.commscope.com/globalassets/digizuite/61722-ds-ethernet-optics-family.pdf
or, have a plan to release new 25G optional modules?

Re: I think unsupported 25G transceivers are "checked" to ICX7550 and ICX7650 in Optics Da

Chandini — Sun, 09 Apr 2023 09:05:48 GMT

Hi Naoki_sato

Thank you for reaching us out here.

From the description mentioned I understand that looks like you have found an error where you are sure that transceivers which are not supported are mentioned in the optics guide for model 7550 and 7650.

I ran through the details you mentioned

From the above details mentioned in optics guide looks like there is firmware requirement for 7550 and 7650 to support 25G optics .

Since its mentioned as 2 for both 7550 and 7650 it is supported only after 10.0.0 or later

Could you please help me with firmware version you are running on the switch ?

If you have any queries you can also feel free to log a case with us using the below link so that this concern can be taken care

https://support.ruckuswireless.com/case_management

Thanks

Re: I think unsupported 25G transceivers are "checked" to ICX7550 and ICX7650 in Optics Da

naoki_sato — Mon, 10 Apr 2023 00:50:16 GMT

Hi Chandini,

Thank you for your reply.

Do you mean both ICX7550 and ICX7650 have 25G port already impremented?
I thought they only have 1/10G SFP+ ports, not act as 25G ports.

Do they alreday have 25G ports but just limited by software?

I do not have 25G transceiver yet, so if it is compatible with these devices, I will test it shortly.

Thank you.

Re: I think unsupported 25G transceivers are "checked" to ICX7550 and ICX7650 in Optics Da

Chandini — Wed, 12 Apr 2023 09:32:45 GMT

Hi Naoki_sato

I checked with regard to the concern you have again internally . I do agree that I did mention the below information

Thank you for reverting back to us. I did check internally with regard to the questions you mentioned above.

The 25G are SFP28 which will be used in SFP+ ports to be supported on the 7550-24F and 48F and in 7650 48F Model.

Support to be added in firmware above 10 series but it's still tentative and under review and testing

I hope this information helps

I got a update again today and looks like it was a mistake in the docs and you are right about it.

The optics docs had few details mentioned incorrectly about SFP28 support , the 7550 & 7650 do not support 25G optics. we are rectifying it from our side. Sorry about that.

Thanks for pointing that out.

Re: I think unsupported 25G transceivers are "checked" to ICX7550 and ICX7650 in Optics Da

naoki_sato — Tue, 11 Apr 2023 00:28:17 GMT

Hi Chandini,

Thank you for sharing that information.

I'm glad to hear that both fiber switches planed to support 25G SFP28 on version 10.x.
I will wait for the firmware release.

Thank you.

Re: I think unsupported 25G transceivers are "checked" to ICX7550 and ICX7650 in Optics Da

nick_s — Sat, 14 Dec 2024 15:02:26 GMT

I hate to revive an old topic, but firmware 10 is out for the 7650, is there any update on support of 25G optics?

Thanks!

Re: I think unsupported 25G transceivers are "checked" to ICX7550 and ICX7650 in Optics Da

BenBeck — Mon, 16 Dec 2024 16:24:44 GMT

There is no 25Gb optic support on 7650.