topic Unable to access Ruckus icx 7150-c12p in ICX Switches

Unable to access Ruckus icx 7150-c12p

kctraceys — Sat, 17 Dec 2022 15:37:31 GMT

I am able to get to the login but all the username/passwords listed in this community do not work. how can I either reset and start over or do anything with it?

Re: Unable to access Ruckus icx 7150-c12p

kamlesh_murthyr — Mon, 19 Dec 2022 08:22:46 GMT

If you have the backup config of switch. Try factory reset the switch then try with factory default username : super and password : sp-admin.

Also you can try password recovery before proceeding with factory reset the switch by referring below link

: https://docs.ruckuswireless.com/fastiron/08.0.60/fastiron-08060-securityguide/GUID-986D5DF0-BF7E-4327-9030-396433DFFD9D.html

Re: Unable to access Ruckus icx 7150-c12p

kctraceys — Mon, 19 Dec 2022 12:24:22 GMT

yeah, I'm probably just not going to use this and if decide to put WAP in my house I'll just go new. This is too difficult. I am not the original owner so I don't have any of this stuff. and even the serial connection...is it truly serial where i need a serial cable? Because I certainly don't have that. And ruckus doesn't want to support it. soooo....meh...may just get wifi extenders through xfinity

Re: Unable to access Ruckus icx 7150-c12p

BenBeck — Tue, 20 Dec 2022 14:08:46 GMT

Hey @kctraceys

You can just use a regular USB type C cable just like most android phones. There is nothing special about the required cable. Drivers are here if needed:

https://support.ruckuswireless.com/software/1414-brocade-ruckus-7150-usb-serial-driver-windows