topic Re: RUCKUS ICX 7450-48F L3 configuration issues in ICX Switches

RUCKUS ICX 7450-48F L3 configuration issues

sogalli — Thu, 22 Sep 2022 08:29:52 GMT

HI I have a new RUCKUS ICX 7450-48F. when i try to configure L3 Virtual interface, the below highlighted command are invalid. if i try to configure a port with an ip address command is invalid.

device# configure terminal
device(config)# vlan 2 name Marketing
device(config-vlan-2)# untag ethernet 1 to 4
device(config-vlan-2)# tagged ethernet 24
device(config-vlan-2)# router-interface ve 2
device(config-vlan-2)# interface ve 2
device(config-vif-1)# ip address 10.1.2.1/24

Re: RUCKUS ICX 7450-48F L3 configuration issues

ys — Thu, 22 Sep 2022 08:33:15 GMT

You may use switch image.

Re: RUCKUS ICX 7450-48F L3 configuration issues

sogalli — Thu, 22 Sep 2022 08:37:52 GMT

Hi Ys

I would like to use VLANs using virtual routing interfaces on the core switch then configure DHCP server for the respective Vlans. does RUCKUS ICX 7450-48F require a license in order to do full L3 features?

Re: RUCKUS ICX 7450-48F L3 configuration issues

ys — Thu, 22 Sep 2022 08:43:23 GMT

Hi,

You will need L3 premium license if you need functions below.

https://support.ruckuswireless.com/articles/000006815

Re: RUCKUS ICX 7450-48F L3 configuration issues

sogalli — Thu, 22 Sep 2022 08:47:42 GMT

Hi Ys

Thanks for your time. goodday.

Re: RUCKUS ICX 7450-48F L3 configuration issues

BenBeck — Thu, 22 Sep 2022 12:59:10 GMT

Hey @sogalli

You do not need a premium license just to make a VE. That is included in the base licenses. You may be running the switching image. Please check 'show version' to confirm. SPS code would be the switching image, while SPR code is the routing image. You need to be on the routing image to make VEs.