My dumb arse erased primary and secondary firmware on ICX7150 now I am stuck at boot.

dariusz_basiaga — Wed, 09 Mar 2022 15:41:59 GMT

Now I am stuck at Boot and that's it. (my plan was to upgrade it from it's ancient 2018 to the current 9 version but alas I guess I've missed a step)

What are my next steps? 🙂

Re: My dumb arse erased primary and secondary firmware on ICX7150 now I am stuck at boot.

Vásquez_Fer — Wed, 09 Mar 2022 21:11:26 GMT

Hi @dariusz_basiaga

Hope you are doing well

Is quite simple to recover the Unit from boot mode:

The first step is to connect an ethernet to the ICX management port and assign an IP on the PC that is of the same range that we are going to configure in the commands below.

Then console the unit and follow the below parameters

setenv serverip [IP Address] >>> IP address of TFTP server
setenv ipaddr [IP Address] ?>> IP address assigned to switch
setenv netmask [Netmask x.x.x.x]
setenv gatewayip [Default gateway]
setenv uboot [Boot image.bin]
setenv image_name [Image Name.bin]

Display the Boot Settings

printenv

Uploading Bootrom

update_uboot

Uploading Firmware

update_primary >>> Updates primary firmware bank
update_secondary >>> Updates secondary firmware bank

Here is the data that shows this process (software recovery from boot mode)

https://docs.commscope.com/bundle/fastiron-08090-upgradeguide/page/GUID-9B5D5A56-039D-44FB-8FD2-B9B55E71ADE8.html

Here is a video link that shows this process:

https://www.youtube.com/watch?v=RHriOYYD_iI

I hope this information can be useful for you

topic Re: My dumb arse erased primary and secondary firmware on ICX7150 now I am stuck at boot. in ICX Switches

My dumb arse erased primary and secondary firmware on ICX7150 now I am stuck at boot.

Re: My dumb arse erased primary and secondary firmware on ICX7150 now I am stuck at boot.