topic Re: Uploading Image for Ruckus 7150 in ICX Switches

Uploading Image for Ruckus 7150

thanh_tien_ton_ — Tue, 10 Dec 2019 08:53:37 GMT

I tried to upload image for ICX7150-C12-POE and it was succesful
But when i show version, I saw information as below

BYT-Ruckus-Spare#show version
Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
(24723488 bytes) from Primary SPR08090c.bin
SW: Version 08.0.61aT211
Compressed Boot-Monitor Image size = 786944, Version:10.1.15T225 (mnz10115)
Compiled on Thu Jan 31 07:08:55 2019

Please have a look at the line
"UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
(24723488 bytes) from Primary SPR08090c.bin"
Something wrong here
Could you give me advice this case please??

Thank you very much

Re: Uploading Image for Ruckus 7150

simon_pollard — Tue, 10 Dec 2019 09:23:48 GMT

Hi

What is the output for show flash ?

Note that when upgrading from 8.0.61 to .90 it is a two stage process, you should first do a standard upgrade using the manifest file and then a second upgrade using the .90 UFI image. The upgrade guide has more details https://docs.arris.com/bundle/fastiron-08090-upgradeguide/page/GUID-5DD7EE86-6988-4CA7-81D2-22EA77BD1992.html

Re: Uploading Image for Ruckus 7150

jijo_panangat — Tue, 10 Dec 2019 10:14:13 GMT

Hi,

The image you copy/upload goes to the flash. ICX has primary and secondary partitions. The show version can only tell you the partition from which the system booted up.

Thanks
Jijo

Re: Uploading Image for Ruckus 7150

thanh_tien_ton_ — Tue, 10 Dec 2019 11:38:28 GMT

I uploaded SPR08090c before then i uploaded SPS08061a
It should be shown "from Primary SPS08061a".
What should i do to make it correct now ?

Re: Uploading Image for Ruckus 7150

simon_pollard — Tue, 10 Dec 2019 12:45:14 GMT

What is the output for show flash ?

Re: Uploading Image for Ruckus 7150

thanh_tien_ton_ — Wed, 11 Dec 2019 06:39:26 GMT

BYT-Ruckus-Spare>show flash
Stack unit 1:
Compressed Pri Code size = 24723488, Version:08.0.61aT211 (SPR08090c.bin)
Compressed Sec Code size = 24723488, Version:08.0.61aT211 (SPR08090c.bin)
Compressed Boot-Monitor Image size = 786944, Version:10.1.15T225
Code Flash Free Space = 1197801472

Version 08.0.61aT211 (SPR08090c.bin) what does it mean???

Re: Uploading Image for Ruckus 7150

simon_pollard — Wed, 11 Dec 2019 17:38:51 GMT

Something has gone wrong with the upgrade, I've not seen anything like that before. I would suggest repeating the upgrade to 8.0.90 using the manifest file, reload, and then upgrade to 8.0.90 UFI image.

Re: Uploading Image for Ruckus 7150

millerjose — Fri, 23 Aug 2024 11:30:12 GMT

When uploading an image for Ruckus, ensure the file meets the platform's specifications for size and format neck joint service Typically, JPEG or PNG formats are preferred. Check that the image resolution is appropriate to avoid quality loss. Use a stable internet connection to prevent interruptions during the upload process, and verify that the image appears correctly once uploaded to ensure it meets your needs.