topic Re: Cant access diferent subnet from rucckus R320 wifi stations in ICX Switches

Cant access diferent subnet from rucckus R320 wifi stations

eimantas_rakaus — Tue, 03 Dec 2019 06:34:45 GMT

We got mikrotik switch (ip 192.168.0.1), then cable goes to Cisco switch, cant be configured, then cable from him goes to ruckus switch ICX 7150-C12P-2X1G(Ip: 192.168.0.7, with set 7 ports POE), then one cable from him goes to Ruckus R320( Ip 192.168.4.1 auto dhcp, main) and six more cables goes to 6 Ruckus R320. From WIFI i cant access 192.168.0.2 adress. Han you help me with setup riht setings?

Re: Cant access diferent subnet from rucckus R320 wifi stations

tim_brumbaugh — Tue, 03 Dec 2019 15:29:11 GMT

Question? Why so many switches?
If you have no control of the switches then how are you passing vlans across with different subnets?
What is doing your routing?
If it were me I would get rid of all of the switches except for the ICX so that you can configure things correctly. I will try and help you out but need a network diagram or a better explanation as to why all the switches and why different manufactures.

Re: Cant access diferent subnet from rucckus R320 wifi stations

eimantas_rakaus — Wed, 04 Dec 2019 07:25:15 GMT

sorry the one with Ip 192.168.0.1 is router. Its old building old infrastructure, thats why so many switches.

Re: Cant access diferent subnet from rucckus R320 wifi stations

tim_brumbaugh — Wed, 04 Dec 2019 15:34:11 GMT

Ok , so how many vlans do you have?
What is handing out DHCP?
Do you have a controller or are you using Unleashed?

Re: Cant access diferent subnet from rucckus R320 wifi stations

eimantas_rakaus — Thu, 05 Dec 2019 07:20:16 GMT

Dhcp handling our router and switch.
We have Ruckus R320 unleashed, one is set as main all connected to ruckus switch ICX 7150-C12P-2X1G
From router cable goes to switch cant be configured, and from him to ruckus switch ICX 7150-C12P-2X1G

Re: Cant access diferent subnet from rucckus R320 wifi stations

michael_brado — Mon, 09 Dec 2019 22:14:41 GMT

In Unleashed, WLAN Advanced Options, you can specify other than default VLAN 1.
So you could have on WLAN for VLAN1, and one WLAN for Other-VLAN.
Does your switch trunk both VLANs to your AP ports is the question?
Can you attach a PC to a switch port configured with Other-VLAN, and get a correct IP/subnet/def-gw from your DHCP router?
You'll need to check that you have both VLANs trunked to all your Unleashed AP ports.