topic Re: How do you show the arp table on a ICX 7450 running 08.0.30q ? in ICX Switches

How do you show the arp table on a ICX 7450 running 08.0.30q ?

alvis_douthit — Thu, 30 Aug 2018 18:00:04 GMT

How do you show the arp table on a ICX 7450 running 08.0.30q ?
Our previous version: 07.3.00j that ran on the FCX 648 you could simply issue a "sh arp" command.

Re: How do you show the arp table on a ICX 7450 running 08.0.30q ?

BenBeck — Thu, 30 Aug 2018 18:01:39 GMT

"show arp" in 8030 as well.

Re: How do you show the arp table on a ICX 7450 running 08.0.30q ?

alvis_douthit — Thu, 30 Aug 2018 18:08:56 GMT

Ben, It doesn't show everything in the arp table when I do a "sh arp" in 8030q.

Re: How do you show the arp table on a ICX 7450 running 08.0.30q ?

alvis_douthit — Thu, 30 Aug 2018 18:09:25 GMT

Ben, It doesn't show everything in the arp table when I do a "sh arp" in 8030q.

Re: How do you show the arp table on a ICX 7450 running 08.0.30q ?

BenBeck — Thu, 30 Aug 2018 18:10:19 GMT

Keep in mind those will only arps that we need to maintain. Are we the gateway for your hosts? Is this an L2 or L3 switch?

Re: How do you show the arp table on a ICX 7450 running 08.0.30q ?

alvis_douthit — Thu, 30 Aug 2018 18:23:42 GMT

Re: How do you show the arp table on a ICX 7450 running 08.0.30q ?

BenBeck — Thu, 30 Aug 2018 18:25:54 GMT

Should be there then as long as we are resolving the arp for that host. If another switch is the gateway for the host, we won't (or don't need) to keep track of it.

Re: How do you show the arp table on a ICX 7450 running 08.0.30q ?

alvis_douthit — Thu, 30 Aug 2018 18:31:28 GMT

Thank you

Re: How do you show the arp table on a ICX 7450 running 08.0.30q ?

netwizz — Thu, 30 Aug 2018 18:45:01 GMT

You might need to do a ping sweep first. Sh Arp works fine in 08.00.30Q. I just checked

Re: How do you show the arp table on a ICX 7450 running 08.0.30q ?

scott_farrand_f — Fri, 31 Aug 2018 16:13:15 GMT

Arp will not show anything if your management vlan isn't the client vlan. If you're trying to hunt down a given device, it's a little more complicated, and you'd need to start from your routing switch/device.

Re: How do you show the arp table on a ICX 7450 running 08.0.30q ?

mohammad_atmazi — Sun, 14 Nov 2021 07:52:18 GMT

show arp