topic Re: Smartzone Bad gateway Web Management Need Help in ICX Switches

Smartzone Bad gateway Web Management Need Help

jammaine_gopez — Fri, 28 Jun 2019 03:11:46 GMT

Hi,

I was planning to practice and explore smartzone so I am trying to install it in my VMWare workstation but the problem is I follow the guides and put the management IP but when I access it through my client's browser I always get the "502 Bad Gateway" error does any here have any answer to this problem? Or any other way to explore and practice smartzone. I am only running a laptop with 8gb RAM. We have a physical ICX switch and Ruckus AP which I will also try to add to the configured smartzone if possible. Will attach screenshots of the error and the specs/configuration of each VM:

Windows 10 Client:

ERROR

WINDOWS CLIENT SPECS/NETWORK CONFIG

SMARTZONE 300 Virtual Config:

SMARTZONE 300 - Specs

Note: They can ping each other. The only problem is the bad gateway error.

I hope someone can help me here.

Kind Regards,
Jam

Re: Smartzone Bad gateway Web Management Need Help

daniel_ling_i7i — Fri, 28 Jun 2019 03:18:54 GMT

Hi Jammaine, your ram for your sz is not enough.. probably the services is still starting at background.. you have gotta wait since u have not enough resources for the vm.

One thing about setting up vSZ is you gotta have patience.

Re: Smartzone Bad gateway Web Management Need Help

jammaine_gopez — Fri, 28 Jun 2019 03:35:59 GMT

Hi Dan,

Thank you for answering I will try to leave it be and access it after a while. I'll check if the bad gateway error goes away.

Regards,
Jam

EDIT:

Its now running added an extra 2GB ram total of 4GB. Thank you for the information.

Re: Smartzone Bad gateway Web Management Need Help

sreeswaminathan — Mon, 06 Apr 2020 09:57:22 GMT

Thanks for sharing this.
Visit: https://busict.com.au/solutions/it-services/