topic Re: MS Light Glowing in ICX Switches

MS Light Glowing

syed_ali_9bdjzy — Sun, 26 May 2019 18:44:15 GMT

I have 2 Core switches as Redundant (ICX 6610 24F) There is MS Green light is glowing in 1 switch and Other switch is glowing Green. what it means?

Re: MS Light Glowing

netwizz — Tue, 28 May 2019 12:39:11 GMT

It is the stacking lights.

Off (no light) - Stacking mode is enabled and the switch is a stack member operating in slave mode, or the switch is operating in standalone mode.

Blinking green - Device is initializing Steady green Stacking mode is enabled and the switch is the stack master.

Steady amber - Stacking mode is initializing and the switch is the standby controller .

Blinking amber - Stacking mode is initializing and the switch is in stacking master arbitration/selection state.

Re: MS Light Glowing

syed_ali_9bdjzy — Tue, 28 May 2019 18:19:02 GMT

thank you netwizz

Re: MS Light Glowing

netwizz — Tue, 28 May 2019 18:27:44 GMT

Good Afternoon:

You will probably get a lot more information with the "show stack" commands.

"show stack ?" to list what is available.