topic Re: ICX7250-24 Firmware Update in ICX Switches

ICX7250-24 Firmware Update

konstantinos_th — Fri, 15 May 2020 14:54:11 GMT

I have the ICX7250P-24 with the below characteristics: Version 08.0.30hT211, SPS08030h.bin, spz10106.bin and i want to update it to the newest version.
I have tried with several usb sticks, with TFTP server and with Web Gui but with no success.

Re: ICX7250-24 Firmware Update

BenBeck — Fri, 15 May 2020 15:23:46 GMT

Hey Konstantinos,

Since you are upgrading from an old version, you will need to jump to a middle code (8080f). We have also changed the format of our images in newer codestreams; we now use a UFI image. For you, it would look something like this:

While on 8030h the commands will be:

copy tftp flash

boot
copy tftp flash

Example for 8030h > 8080f (assuming switch code and ICX7250)

copy tftp flash 192.168.1.250 spz10114.bin boot
copy tftp flash 192.168.1.250 SPS08080f.bin primary
wr mem
*reload into 8080f*

Once booted to 8080f:

wr mem (this is necessary to ensure your configuration is upgraded as syntax can change)

copy tftp flash

Example for 8080f > 8092b (assuming switch code and ICX7250 again)

copy tftp flash 192.168.1.250 SPS08092bufi.bin primary
wr mem
*reload into 8092b*

Once you are on 8080f, you can upgrade to any 8090/8092 UFI image.

Let me know if that helps! You can always open a case and we can assist you as well.

Re: ICX7250-24 Firmware Update

das_gesamte_net — Fri, 03 Jul 2020 09:02:54 GMT

Don't we need to upgrade to spz10115.bin boot-code-image before upgrading to SPS08090dufi.bin OS-code-image?