topic Re: Avoid client changes on the switch routing in ICX Switches

Avoid client changes on the switch routing

fernando_fl_rez — Fri, 24 Aug 2018 21:54:57 GMT

Hello, so today as part of my learning I tried to connect a wi-fi router to my network. After a little while all the vlan was down. Looked into the running config and saw that the port had an ip assigned and also a route was placed for 0.0.0.0/0 which madr my other pcs to stop having internet access.

Is there a way to avoid this?

Thank you!

Re: Avoid client changes on the switch routing

martin_martin — Mon, 27 Aug 2018 07:21:45 GMT

Hi Fernando,
What version are you running on the switch, and also please put the config changes you made in the forum so we can check what might cause it.

Regards
martin

Re: Avoid client changes on the switch routing

netwizz — Mon, 27 Aug 2018 11:42:21 GMT

You need at least one (1) interface in a VLAN that is up for the route to be placed into the routing table. Please check this.

Re: Avoid client changes on the switch routing

fernando_fl_rez — Tue, 28 Aug 2018 16:02:54 GMT

This was it! Thank you!