topic Re: Ruckus ICX AAA in ICX Switches

Ruckus ICX AAA

irakli_gvishian — Thu, 20 Jan 2022 17:09:07 GMT

Hello, I have configured Authentication/Authorization on my Ruckus ICX 7150 swithes via AAA (Tacacs+(Cisco ACS)). Authentication/Authorization works fine via SSH, but as I have discovered console doesn't work anymore. I connect the cable to console port but nothing happend

Here is my config:

aaa authentication login default tacacs+ local

aaa authentication login privilege-mode
aaa authorization commands 0 default tacacs+ none
aaa authorization exec default tacacs+ none
aaa accounting exec default start-stop tacacs+

Which command I have missed?

Thanks.

Re: Ruckus ICX AAA

irakli_gvishian — Fri, 21 Jan 2022 12:25:49 GMT

upd

Re: Ruckus ICX AAA

irakli_gvishian — Sun, 23 Jan 2022 18:22:57 GMT

upd

Re: Ruckus ICX AAA

BenBeck — Tue, 25 Jan 2022 15:30:45 GMT

Hey There,

You would need the following to enable console auth:

ICX(config)#enable aaa console

Are you saying you are getting no console response at all? If that is the case, that would have nothing to do with the configuration. You should get some response on console no matter the configuration.

Re: Ruckus ICX AAA

irakli_gvishian — Tue, 25 Jan 2022 20:13:16 GMT

Hello ben_beck, thanks for your reply.

I tried with enable console aaa, but situation is the same.

Yes, no response at all.

Re: Ruckus ICX AAA

BenBeck — Tue, 25 Jan 2022 20:54:13 GMT

@irakli_gvishiani Does your console cable work on other switches? You should get some kind of prompt on the console no matter the configuration.