topic Re: Is there an official way to request features? in ICX Switches

Is there an official way to request features?

corey_costello — Sun, 07 Apr 2019 01:48:20 GMT

Over the years, I've used a lot of various CLIs and each have their own awesome ideas.

So, is there a way to request features?

If so, tab auto complete of user defined options is AMAZING.

Also, "logging synchronous" and "Show display | top set" to show the commands to make the entire configuration.

Re: Is there an official way to request features?

vincent_felisaz — Sun, 07 Apr 2019 20:11:57 GMT

Hi Corey

You'll be happy with the lastest release 8.0.90 in which there is Tab auto-completion. And I'm agree with you that is very useful and save time.

Other features need to be investigated with Product Manager.

Cheers
Vince

Re: Is there an official way to request features?

netwizz — Mon, 08 Apr 2019 14:29:53 GMT

8.0.90a does not seem to do tab auto-completion for user-defined items

ICX7150-C12 Switch(config)#ip access-list extended TEST

ICX7150-C12 Switch(config-ext-nacl)#permit ip any any
ICX7150-C12 Switch(config-ext-nacl)#exit

ICX7150-C12 Switch(config)#int e 1/2/1

ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group
DECIMAL Number
ASCII string Access List Name
frag
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TE
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TE
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TE
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TE
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TE
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TES
ASCII string Access List Name
ICX7150-C12 Switch(config-if-e1000-1/2/1)#ip access-group TES

If it were going to do that, it would offer to autocomplete the word TEST being it was a user-defined object.

Re: Is there an official way to request features?

corey_costello — Wed, 10 Apr 2019 00:44:59 GMT

Lololol no it isn't.

Re: Is there an official way to request features?

jijo_panangat — Wed, 24 Apr 2019 09:59:38 GMT

Hello Corey,

As explained above, tab based auto completion seems limited to system level commands, This enhancement is added from 08.0.80 onwards, You may reach out to your accounts or SE team to channel this request to PM team.

Re: Is there an official way to request features?

netwizz — Wed, 24 Apr 2019 12:00:36 GMT

Actually, 08.0.30x, 08.0.60x, 08.0.61, 08.0.70x all had system-level auto-complete as well.

SSH@LAB(config)#sh ver
Copyright (c) 1996-2016 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Aug 31 2018 at 07:07:11 labeled as FCXR08030sa
(10539398 bytes) from Secondary FCXR08030sa.bin
SW: Version 08.0.30saT7f3
Boot-Monitor Image size = 370695, Version:10.1.00T7f5 (grz10100)
HW: Stackable ICX6610-24F
==========================================================================
UNIT 1: SL 1: ICX6610-24F 24-port Management Module
Serial #:
License: ICX6610_PREM_ROUTER_SOFT_PACKAGE (LID: )
P-ENGINE 0: type E02B, rev 01
==========================================================================
UNIT 1: SL 2: ICX6610-QSFP 10-port 160G Module
==========================================================================
UNIT 1: SL 3: ICX6610-8-port Dual Mode(SFP/SFP+) Module
==========================================================================
800 MHz Power PC processor 8544E (version 0021/0023) 400 MHz bus
65536 KB flash memory
512 MB DRAM
STACKID 1 system uptime is 197 day(s) 10 hour(s) 27 minute(s) 27 second(s)
The system started at 21:33:24 Eastern Mon Oct 08 2018

The system : started=warm start reloaded=by "reload"

SSH@LAB(config)#
SSH@LAB(config)#
SSH@LAB(config)#ip add
add-host-route-first Add host route before sending buffered packets
SSH@LAB(config)#ip acc
access-list Configure named access list
SSH@LAB(config)#ip access-list