topic Not Receiving Inbound Traffic on RSPAN Destination in ICX Switches https://community.ruckuswireless.com/t5/ICX-Switches/Not-Receiving-Inbound-Traffic-on-RSPAN-Destination/m-p/39245#M2840 <P style="margin: 0;">Hello.&nbsp; I have rspan setup, but noticed on my workstation running Wireshark I'm only receiving outbound traffic from the source device.&nbsp; Without luck I've tried <STRONG>rspan source monitor-both eth 2/1/20</STRONG> as well as <STRONG>rspan source monitor-in eth 2/1/20</STRONG> AND <STRONG>rspan source monitor-out eth 2/1/20.&nbsp;</STRONG> I do not have a capture or display filter set on Wireshark.&nbsp; Below is what I have configured.&nbsp; I was wondering if someone could see what I'm missing?&nbsp; Thanks.</P> <P style="margin: 0;"></P> <P style="margin: 0;"><SPAN style="text-decoration: underline;"><STRONG>Access SW with source device</STRONG></SPAN></P> <P style="margin: 0;">rspan-vlan 3100<BR />tagged lag 1&nbsp; &nbsp; &nbsp; <EM>[lag 1 is trunk to Core SW]</EM><BR />rspan destination lag 1<BR />rspan source monitor-in ethe 2/1/20<BR />rspan source monitor-out ethe 2/1/20<BR />spanning-tree 802-1w<STRONG></STRONG><SPAN style="text-decoration: underline;"><STRONG><BR /></STRONG></SPAN></P> <P style="margin: 0;"></P> <P style="margin: 0;">int eth 2/1/20</P> <P style="margin: 0;">spanning-tree 802-1w admin-edge-port</P> <P style="margin: 0;">stp-bpdu-guard</P> <P style="margin: 0;"></P> <P style="margin: 0;"><STRONG><SPAN style="text-decoration: underline;">Core SW</SPAN></STRONG></P> <P style="margin: 0;">rspan-vlan 3100</P> <P style="margin: 0;">tagged lag 1 to lag 48&nbsp; &nbsp;<EM>[all lags are tagged]</EM></P> <P style="margin: 0;">spanning-tree 802-1w</P> <P style="margin: 0;"><STRONG><SPAN style="text-decoration: underline;"></SPAN></STRONG></P> <P style="margin: 0;"><STRONG><SPAN style="text-decoration: underline;">Access SW with destination workstation running Wireshark</SPAN></STRONG></P> <P style="margin: 0;">rspan-vlan 3100</P> <P style="margin: 0;">tagged eth 4/1/10 lag 1&nbsp; &nbsp; &nbsp; <EM>[lag 1 is trunk to Core SW]</EM></P> <P style="margin: 0;">rspan destination eth 4/1/10</P> <P style="margin: 0;">spanning-tree 802-1w</P> <P style="margin: 0;"><STRONG><SPAN style="text-decoration: underline;"></SPAN></STRONG></P> <P style="margin: 0;"><STRONG><SPAN style="text-decoration: underline;"></SPAN></STRONG></P> Fri, 14 Jan 2022 16:32:33 GMT chell_7zwe 2022-01-14T16:32:33Z Not Receiving Inbound Traffic on RSPAN Destination https://community.ruckuswireless.com/t5/ICX-Switches/Not-Receiving-Inbound-Traffic-on-RSPAN-Destination/m-p/39245#M2840 <P style="margin: 0;">Hello.&nbsp; I have rspan setup, but noticed on my workstation running Wireshark I'm only receiving outbound traffic from the source device.&nbsp; Without luck I've tried <STRONG>rspan source monitor-both eth 2/1/20</STRONG> as well as <STRONG>rspan source monitor-in eth 2/1/20</STRONG> AND <STRONG>rspan source monitor-out eth 2/1/20.&nbsp;</STRONG> I do not have a capture or display filter set on Wireshark.&nbsp; Below is what I have configured.&nbsp; I was wondering if someone could see what I'm missing?&nbsp; Thanks.</P> <P style="margin: 0;"></P> <P style="margin: 0;"><SPAN style="text-decoration: underline;"><STRONG>Access SW with source device</STRONG></SPAN></P> <P style="margin: 0;">rspan-vlan 3100<BR />tagged lag 1&nbsp; &nbsp; &nbsp; <EM>[lag 1 is trunk to Core SW]</EM><BR />rspan destination lag 1<BR />rspan source monitor-in ethe 2/1/20<BR />rspan source monitor-out ethe 2/1/20<BR />spanning-tree 802-1w<STRONG></STRONG><SPAN style="text-decoration: underline;"><STRONG><BR /></STRONG></SPAN></P> <P style="margin: 0;"></P> <P style="margin: 0;">int eth 2/1/20</P> <P style="margin: 0;">spanning-tree 802-1w admin-edge-port</P> <P style="margin: 0;">stp-bpdu-guard</P> <P style="margin: 0;"></P> <P style="margin: 0;"><STRONG><SPAN style="text-decoration: underline;">Core SW</SPAN></STRONG></P> <P style="margin: 0;">rspan-vlan 3100</P> <P style="margin: 0;">tagged lag 1 to lag 48&nbsp; &nbsp;<EM>[all lags are tagged]</EM></P> <P style="margin: 0;">spanning-tree 802-1w</P> <P style="margin: 0;"><STRONG><SPAN style="text-decoration: underline;"></SPAN></STRONG></P> <P style="margin: 0;"><STRONG><SPAN style="text-decoration: underline;">Access SW with destination workstation running Wireshark</SPAN></STRONG></P> <P style="margin: 0;">rspan-vlan 3100</P> <P style="margin: 0;">tagged eth 4/1/10 lag 1&nbsp; &nbsp; &nbsp; <EM>[lag 1 is trunk to Core SW]</EM></P> <P style="margin: 0;">rspan destination eth 4/1/10</P> <P style="margin: 0;">spanning-tree 802-1w</P> <P style="margin: 0;"><STRONG><SPAN style="text-decoration: underline;"></SPAN></STRONG></P> <P style="margin: 0;"><STRONG><SPAN style="text-decoration: underline;"></SPAN></STRONG></P> Fri, 14 Jan 2022 16:32:33 GMT https://community.ruckuswireless.com/t5/ICX-Switches/Not-Receiving-Inbound-Traffic-on-RSPAN-Destination/m-p/39245#M2840 chell_7zwe 2022-01-14T16:32:33Z