topic Re: New firmware, old bootrom in ICX Switches

New firmware, old bootrom

sinisa_babic — Tue, 28 Dec 2021 08:27:09 GMT

Hello,

I did an upgrade ICX7150 to SPS08095e to a few switches but the old bootrom remained on some of them.

telnet@ICX7150#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 31457280, Version:08.0.95eT211 (SPS08095e.bin)
Compressed Sec Code size = 31457280, Version:08.0.95eT211 (SPS08095e.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.14T225 (mnz10114)
Compressed Sec Boot Code size = 786944, Version:10.1.21T225 (mnz10121)

Any idea how to solve this?

Re: New firmware, old bootrom

mohammad_atmazi — Mon, 03 Jan 2022 12:33:13 GMT

it's a UFI image no Bootrom is needed

Re: New firmware, old bootrom

sinisa_babic — Tue, 04 Jan 2022 09:23:02 GMT

Thank you for response.

Re: New firmware, old bootrom

BenBeck — Wed, 12 Jan 2022 16:15:13 GMT

Hey There,

Are you seeing a bootrom mismatch? 'show version' and 'show boot-monitor' should tell you. The boot code is included in the UFI image. If you are seeing any kind of mismatch, just go ahead and re-copy the UFI image to the appropriate partition (pri/sec) and it should get updated.

Re: New firmware, old bootrom

sinisa_babic — Wed, 19 Jan 2022 10:28:34 GMT

@ben_beck

I did that and now is ok, there is no mismatch anymore. Thanks.