https://community.ruckuswireless.com/t5/ICX-Switches/Upgrading-ICX-Switches-via-Unleashed/m-p/36702#M2481 <P style="margin: 0;">Hey, Kris.</P> <P style="margin: 0;"></P> <P style="margin: 0;">Thank you for sharing this interesting scenario. I wonder if maybe the new image is copied to flash and only the reload is the one thing left to complete the upgrade process.</P> <P style="margin: 0;">However, our best practice for upgrading the ICX is through TFTP.</P> <P style="margin: 0;"></P> <P style="margin: 0;">Please let me know your thoughts.</P> <P style="margin: 0;"></P> Mon, 08 Nov 2021 12:24:47 GMT Orlando_Elias 2021-11-08T12:24:47Z https://community.ruckuswireless.com/t5/ICX-Switches/Upgrading-ICX-Switches-via-Unleashed/m-p/36701#M2480 <P style="margin: 0;">Hello,</P> <P style="margin: 0;"></P> <P style="margin: 0;">I have 2 Ruckus ICX's, 7150 switches. One is a 48p-POE &amp; a 24p-POE. I have them both synch'd on the Unleashed platform. They both run versions: <STRONG>08.0.90dT211.</STRONG></P> <P style="margin: 0;"><STRONG></STRONG></P> <P style="margin: 0;">I unzipped the folder for the FW I'm wanting to upgrade to:<STRONG> 08095d, </STRONG>then I navigate to 7150 folder &gt; Images &gt; SPR08095dufi.bin. It uploads successfully. I then proceed to upgrade - it takes about 10 minutes, and it shows "Upgrading" on the the left side pane next to the switch - however when it's done, it hasn't upgraded. It's still on the existing FW.&nbsp;</P> <P style="margin: 0;"></P> <P style="margin: 0;">What is it that I'm doing wrong? My Unleashed version is: <STRONG>200.9.10.4 build 233</STRONG>. Is this best practice, or do I need to do this via TFTP ?&nbsp;</P> <P style="margin: 0;"></P> <P style="margin: 0;">Thanks.</P> Sat, 06 Nov 2021 18:43:31 GMT https://community.ruckuswireless.com/t5/ICX-Switches/Upgrading-ICX-Switches-via-Unleashed/m-p/36701#M2480 kristphr 2021-11-06T18:43:31Z https://community.ruckuswireless.com/t5/ICX-Switches/Upgrading-ICX-Switches-via-Unleashed/m-p/36702#M2481 <P style="margin: 0;">Hey, Kris.</P> <P style="margin: 0;"></P> <P style="margin: 0;">Thank you for sharing this interesting scenario. I wonder if maybe the new image is copied to flash and only the reload is the one thing left to complete the upgrade process.</P> <P style="margin: 0;">However, our best practice for upgrading the ICX is through TFTP.</P> <P style="margin: 0;"></P> <P style="margin: 0;">Please let me know your thoughts.</P> <P style="margin: 0;"></P> Mon, 08 Nov 2021 12:24:47 GMT https://community.ruckuswireless.com/t5/ICX-Switches/Upgrading-ICX-Switches-via-Unleashed/m-p/36702#M2481 Orlando_Elias 2021-11-08T12:24:47Z