topic Re: Firewall settings for ICX 7150 in ICX Switches

Firewall settings for ICX 7150

sam_chan_bve1y5 — Mon, 12 Nov 2018 14:57:09 GMT

Assuming ICX with dhcp ip behind Firewall, in order for ICX 7150 (ver 8.0.80ca) with sw registrar feature) to communicate with vSZ 5.0 controller, what protocol ports need to be allowed in firewall?

Re: Firewall settings for ICX 7150

paul_mcguire_20 — Mon, 12 Nov 2018 14:58:48 GMT

I believe it is https

Re: Firewall settings for ICX 7150

alexey_isakov — Mon, 12 Nov 2018 15:01:44 GMT

11443, 91, 443

Re: Firewall settings for ICX 7150

sam_chan_bve1y5 — Mon, 12 Nov 2018 15:04:38 GMT

I was told they are using internal protocol over SSH/TELNET to communicate. That is why in early version, those protocol has to be enabled in configuration, but not in this new version. No?

1143, 91, 443 are they udp port#? TCP port#?

Re: Firewall settings for ICX 7150

Ankush_Chandan — Mon, 12 Nov 2018 15:34:59 GMT

Hi Sam,

You need to allow port 22 and 443. Please refer to vSZ admin guide page 134 for reference.

Regards,
-Ankush