Web GUI over rj45 management port only

fernando_fl_rez — Thu, 16 Aug 2018 02:46:41 GMT

Is it possible to allow web GUI access only through the management port? Im running an ICX 7150 24P.

Thanks

Re: Web GUI over rj45 management port only

david_chavarria — Mon, 20 Aug 2018 18:54:15 GMT

Hello Fernando

Is not possible to configure web management access only through the management port.

Is possible to set a VLAN or specific ports to be able to access but not the management port specifically on this case.

An option could be to create a management VLAN and assign a port or ports to it and use them only for management access.

The options you have to configure web management access is as follows:

"web-management enable { vlan vlan-id | ethernet unit/slot/port [ to unit/slot/port | [ ethernet unit/slot/port to unit/slot/port | ethernet unit/slot/port ] "

For example to enable it of r a specific VLAN:"web-management enable vlan 10"

- For a specific port: "web-management enable Ethernet 1/1/1"

-For a group of ports: "web-management enable Ethernet 1/1/1 to 1/1/5 "

I hope this information is usseful.

Regards.

Re: Web GUI over rj45 management port only

fernando_fl_rez — Tue, 21 Aug 2018 09:24:50 GMT

Thank you!

topic Re: Web GUI over rj45 management port only in ICX Switches

Web GUI over rj45 management port only

Re: Web GUI over rj45 management port only

Re: Web GUI over rj45 management port only