topic Re: error invalid input when trying to create ve interface in ICX Switches

error invalid input when trying to create ve interface

dragos_dimitriu — Fri, 09 Nov 2018 15:22:58 GMT

I'm getting the error invalid input when trying to create ve interface
Firmware version : SPR08061c

I have created a VLAN , added an untagged port to created VLAN .
When trying to create a routing interface 'router-interface ve 100' I'm getting the following error :

"error - IP routing, vrf, ip policy, route-only, rpf-mode or ip-mac was configured on ports 1/1/10"

Re: error invalid input when trying to create ve interface

BenBeck — Fri, 09 Nov 2018 15:25:28 GMT

Something under interface 1/1/10 is probably stopping the configuration. Can you post "show run int e 1/1/10"?

Re: error invalid input when trying to create ve interface

dragos_dimitriu — Fri, 09 Nov 2018 16:03:39 GMT

Solved. It was an ip addr set on interface 1/1/10
All works now

Thanks

Re: error invalid input when trying to create ve interface

agent_halal — Fri, 15 Aug 2025 03:13:58 GMT

I have a ip addr set too, how did you clear it? The port it says I have an ip addr is my uplink port to a switch but eventually to my modem, would clearing the ip effect anything? anything helps!