topic Re: License Activation in ICX Switches

License Activation

ahmed_aziz_fl8o — Wed, 25 Sep 2019 09:16:46 GMT

we upload -2X10G-LIC-POD , Before we installed two 10G license and activated only one port.. now we are not able to activate the second port. kindly support us

Re: License Activation

simon_pollard — Wed, 25 Sep 2019 10:04:25 GMT

Hi Ahmed

Please can you provide some more information;
Model of switch
Software version
show license output from the switch

Re: License Activation

ahmed_aziz_fl8o — Wed, 25 Sep 2019 10:15:59 GMT

hi simon

Model of switch : 7250
attached is Software version and show license output from the switch

Re: License Activation

simon_pollard — Wed, 25 Sep 2019 10:30:51 GMT

Hi Ahmed

On a 7250 with a 2 port PoD license ports 1/2/1 and 1/2/3 will be 10G capable. You should be able to set the speed with the speed-duplex command.

The show pod command will help you see which ports are licensed for 10G

Re: License Activation

ahmed_aziz_fl8o — Wed, 25 Sep 2019 10:38:31 GMT

hi semon thank you for your support
Enquiry : we run speed-duplex command on port 1/2/4 , but still we receive a message No license present for port . is that what u mean

Re: License Activation

simon_pollard — Wed, 25 Sep 2019 10:42:08 GMT

Only 1/2/1 and 1/2/3 can be configured as 10G with a two port license, this is why you see an error for 1/2/4. With an 8 port license all ports would be configurable as 10G.

Re: License Activation

ahmed_aziz_fl8o — Wed, 25 Sep 2019 10:43:33 GMT

hi simon thank you very much