dot1x configuration issue

michael_secret — Mon, 23 Apr 2018 09:39:06 GMT

Hi , i try to make dot1x configuration but i get this information. How to resolve it ?

telnet@7450_B28-P1(config-authen)#dot1x enable ethernet 2/1/2
Error - MAC-AUTH/Dot1x cannot be enabled on UNTAGGED port 2/1/2 on non-system default vlan

telnet@7450_B28-P1(config-authen)#sho dot1x conf
PAE Capability : Authenticator Only
Status : Enabled
Auth Order : dot1x mac-auth
Default VLAN : 200
Auth VLAN Mode : Multiple Untagged Mode
Restricted VLAN : Not configured
Critical VLAN : Not configured
Guest VLAN : Not configured
Action on Auth failure : Block traffic
MAC Session Aging : Enabled
Filter Strict Security : Enabled
Re-authentication : Disabled
Session max sw-age : 120 seconds
Session max hw-age : 70 seconds
Quiet-period : 60 seconds
TX-period : 30 seconds
Reauth-period : 3600 seconds
Supplicant-timeout : 30 seconds
Max Reauth requests : 2
Protocol Version : 1

my running config :

authentication
auth-default-vlan 200
auth-vlan-mode multiple-untagged
dot1x enable
!
aaa authentication dot1x default radius
aaa authentication login default local
enable password-display
enable telnet authentication
hostname 7450_B28-P1
ip route 0.0.0.0/0 192.168.50.1
!
logging host 192.168.50.5
logging host 192.168.50.9
username admin password XXXXXXXXXXXXXXXXXXXXXX.
radius-server host 192.168.53.10 auth-port 1812 acct-port 1813 default key XXXXXXXXXXXXXXXX
radius-server key XXXXXXXXXXXXX

Re: dot1x configuration issue

bartek123 — Mon, 31 Oct 2022 09:21:53 GMT

hello - did you resolve it? I have the same problem

topic dot1x configuration issue in ICX Switches

dot1x configuration issue

Re: dot1x configuration issue