topic Re: SZ100 with ICX7750-48XGC ,,,how to connect physically in ICX Switches

SZ100 with ICX7750-48XGC ,,,how to connect physically

lotus_administr — Thu, 15 Oct 2020 08:42:20 GMT

i am implementing a NEW SZ100 with an existing network setup ,, the Core Switch is ICX7750-48XGC with 7 stacks..

am new with Ruckus WLC as well as Ruckus Switches...

please help me to understand its physical connectivity and Data plane communication.

am Connected first 2 ports of WLC to Core Switch ,, the LAG is created at Core with 2 ports ,,,
Port 5/1/47 and 48 ..these 2 ports are part of LAG-11

lag blue static id 11
ports ethe 5/1/47 to 5/1/48
--------------------------------------
vlan 12 name Managment by port
untagged lag 11

is the setup and doing is correct ??

please suggest any correction if required

thanks,
Anvar

Re: SZ100 with ICX7750-48XGC ,,,how to connect physically

santhosh_dk — Fri, 16 Oct 2020 21:15:31 GMT

HI Anvar,

LAG will not be supported by SZ100, there is Feature Request already to include this feature.

Kindly connect a Ethernet cable to port1 or Port2 of SZ100 to configure, please refer Quick setup and getting started Guide below.

https://ruckus-support.s3.amazonaws.com/private/documents/2817/SZ100-QuickSetupGuide-RevG-20200827.p...

https://ruckus-support.s3.amazonaws.com/private/documents/2816/SZ100-GettingStartedGuide-RevH-20200827.pdf?AWSAccessKeyId=AKIAJM3QLNNKLOV235TQ&Expires=1602882873&Signature=SuNz91%2BO0hWQHF6PmJIw5ieMImo%3D

Regards

Santhosh

Re: SZ100 with ICX7750-48XGC ,,,how to connect physically

lotus_administr — Sat, 17 Oct 2020 03:21:45 GMT

Re: SZ100 with ICX7750-48XGC ,,,how to connect physically

lotus_administr — Sat, 17 Oct 2020 03:23:02 GMT

Hi Santhosh ,

these pages are not able to open ..looks links are not working