topic Re: ICX 7150 default login in ICX Switches

ICX 7150 default login

graham_salters — Thu, 05 Aug 2021 20:18:20 GMT

Does anyone know the default login to ICX 7150 24P?

I thought it was username: Super and password was spadmin?

Re: ICX 7150 default login

ravi_vatsavai — Thu, 05 Aug 2021 20:20:25 GMT

@graham_salters - Very close 🙂 . The default password is sp-admin.

Re: ICX 7150 default login

craig_burchfiel — Thu, 05 Aug 2021 20:47:10 GMT

connect to the console of the switch, boot up, interrupt the boot by pressing b.

enter "no password" and "boot".

Re: ICX 7150 default login

graham_salters — Thu, 05 Aug 2021 20:48:59 GMT

Ravi, you are superstar thanks

Re: ICX 7150 default login

craig_burchfiel — Thu, 05 Aug 2021 20:52:17 GMT

You would have figured it out. Thank you though.

Re: ICX 7150 default login

mohammad_atmazi — Sat, 07 Aug 2021 20:22:48 GMT

The username (super) and the password (sp-admin) that’s correct if you have a new switch need password otherwise you need to reset the password by using console

Re: ICX 7150 default login

Tksupport — Fri, 11 Nov 2022 01:29:08 GMT

Ruckus-ICX login:super

Password:sp-admin

Ruckus-ICX login:

I have followed the steps and can't reset login & password.

Is there a solution?

Re: ICX 7150 default login

BenBeck — Fri, 11 Nov 2022 02:52:25 GMT

Are you using physical console cable? This cannot be done from telnet/ssh. You will need to continuously tab 'b' during bootup and then you should get boot prompt.

Re: ICX 7150 default login

Joey_C — Sun, 07 Apr 2024 00:08:46 GMT

I am also trying to log into my ICX 7150 C12. I changed ISP's and my router. I managed to get my R510 AP's factory reset and set up my wireless network in the Ruckus Unleashed mobile app. I had to rejoin all my devices manually to the new WiFi array...yet, when I go into my Unleashed app, everything looks fine except the switch. It's in red and says not connected. My PC is connected to one of the LAN ports on the switch. http://x.x.x.x/home (switch IP) gets me to a web interface off of the TCP port 80 on the ICX. There is a login prompt, but even after factory reset, "super" "sp-admin" does not work. I just want to make sure the switch has the correct gateway IP and other needed configuration settings. Thanks.