topic Switch config suppot Ruckus icx7150-24p in ICX Switches https://community.ruckuswireless.com/t5/ICX-Switches/Switch-config-suppot-Ruckus-icx7150-24p/m-p/32297#M1876 <P style="margin: 0;">Hi,&nbsp;</P> <P style="margin: 0;"></P> <P style="margin: 0;">I am configuring two switches a 24P and 8port.&nbsp; The 8 port is to have two access points on it and the 24P will have have the rest of the network hanging off it.</P> <P style="margin: 0;"></P> <P style="margin: 0;">I have set the ip address of the switch to (for example) 192.168.x.x 255.255.255.0, on CISCO this normally set the management vlan but on the IC it is not setting the management Ip address?&nbsp; What am I doing wrong</P> <P style="margin: 0;"></P> <P style="margin: 0;">Also, when I set the two swithes in series do I need to configure a trunk like CISCO or not?&nbsp; &nbsp;</P> <P style="margin: 0;"></P> <P style="margin: 0;">This is abit different to CISCO so looking for a bit of help and guidance so as to avoid install issues and network loops with two switches</P> <P style="margin: 0;"></P> <P style="margin: 0;">Thanks all</P> Fri, 06 Aug 2021 10:38:20 GMT graham_salters 2021-08-06T10:38:20Z Switch config suppot Ruckus icx7150-24p https://community.ruckuswireless.com/t5/ICX-Switches/Switch-config-suppot-Ruckus-icx7150-24p/m-p/32297#M1876 <P style="margin: 0;">Hi,&nbsp;</P> <P style="margin: 0;"></P> <P style="margin: 0;">I am configuring two switches a 24P and 8port.&nbsp; The 8 port is to have two access points on it and the 24P will have have the rest of the network hanging off it.</P> <P style="margin: 0;"></P> <P style="margin: 0;">I have set the ip address of the switch to (for example) 192.168.x.x 255.255.255.0, on CISCO this normally set the management vlan but on the IC it is not setting the management Ip address?&nbsp; What am I doing wrong</P> <P style="margin: 0;"></P> <P style="margin: 0;">Also, when I set the two swithes in series do I need to configure a trunk like CISCO or not?&nbsp; &nbsp;</P> <P style="margin: 0;"></P> <P style="margin: 0;">This is abit different to CISCO so looking for a bit of help and guidance so as to avoid install issues and network loops with two switches</P> <P style="margin: 0;"></P> <P style="margin: 0;">Thanks all</P> Fri, 06 Aug 2021 10:38:20 GMT https://community.ruckuswireless.com/t5/ICX-Switches/Switch-config-suppot-Ruckus-icx7150-24p/m-p/32297#M1876 graham_salters 2021-08-06T10:38:20Z