topic SNMP v3 is not working properly in ICX6450 switches in ICX Switches

SNMP v3 is not working properly in ICX6450 switches

reda_sh — Thu, 13 Aug 2020 13:18:11 GMT

can you please share the valid configuration of SNMP ver3 in ICX6450 as I configured it but the SNMP agent did identify or get data from my switches

Re: SNMP v3 is not working properly in ICX6450 switches

jijo_panangat — Mon, 17 Aug 2020 05:22:39 GMT

Hello Reda sh,

The switch config is very straightforward, Pls watch a short video on it.

https://www.youtube.com/watch?v=x_BDNSZJAaY

Additional Questions -

1) Firmware version you are running on the switch.
2) Did you check the reachability end to end.
3) Any specific error message when you send GET request

Thanks
Jijo

Re: SNMP v3 is not working properly in ICX6450 switches

chris_tagg — Tue, 25 Aug 2020 13:32:01 GMT

Is there an SNMPv3 setup equivalent video ?

Re: SNMP v3 is not working properly in ICX6450 switches

jijo_panangat — Thu, 27 Aug 2020 04:38:27 GMT

Hey Chris,

Perhaps not ! If you are looking for a config examples, we have it covered in FI management config guide. Pls look for 'SNMP v3 configuration examples'

http://docs.ruckuswireless.com/fastiron/08.0.70/fastiron-08070-managementguide/GUID-F0E639A2-5109-49...

Thanks
Jijo

Re: SNMP v3 is not working properly in ICX6450 switches

chris_tagg — Thu, 27 Aug 2020 09:49:09 GMT

Hi Jijo

I'd looked at those. It turned out that my snmpwalk command was missing the mandatory level option!

So for anyone looking later, you can use this command to snmpwalk the switch once you have configured v3 as per the examples in Jijo's link. This proves you've done it correctly!

snmpwalk -v 3 -a MD5 -A password1234 -x AES -X password1234 -l authPriv -u admin2 x.x.x.x

Re: SNMP v3 is not working properly in ICX6450 switches

jijo_panangat — Thu, 27 Aug 2020 11:53:23 GMT

Great Chris!

Glad that you've figured it out.

Thanks
Jijo