topic Re: Layer 3 on 7150 ICX in ICX Switches

Layer 3 on 7150 ICX

jeff_nichols_26 — Thu, 30 Jul 2020 01:10:27 GMT

I need help working with and configuring a Ruckus 7150 ICX switch with Router code and programming it for a layer 3 VLAN to run over a layer 2 VLAN product from an ISP.

How do I get the layer 3 piece configured on the core and on the off site device.

Thanks,

Re: Layer 3 on 7150 ICX

jijo_panangat — Thu, 30 Jul 2020 04:54:58 GMT

Hi Jeff,

Pls watch this short video which demonstrates configuring VLAN Routing on a Ruckus ICX switch.

https://www.youtube.com/watch?v=fpicvYXWRhU

Thanks
Jijo

Re: Layer 3 on 7150 ICX

jeff_nichols_26 — Thu, 30 Jul 2020 12:46:50 GMT

Thank you. I already have VE's build and IP addresses on the VE's. I have the vlan built and tagged on both sides and running. For the routing do I not have to assign an IP to a port? Should just have the VLAN and VE's work?

Re: Layer 3 on 7150 ICX

jijo_panangat — Sun, 02 Aug 2020 07:37:12 GMT

You probably need to have route added with next hop pointing to ISP router.