topic Am I able to get my secondary boot code to primary? in ICX Switches

Am I able to get my secondary boot code to primary?

sh_ruckus_rucku — Tue, 23 Mar 2021 21:27:04 GMT

Hi all,

Running a Ruckus ICX7150-C12-POE and I followed the upgrade process from https://docs.commscope.com/bundle/fastiron-08090-upgradeguide/page/GUID-5DD7EE86-6988-4CA7-81D2-22EA77BD1992.html to upgrade to 08.0.90j on my switch. After copying over the image to the secondary and rebooting my switch I received the error

==========================================================================
========== WARNING: Boot-monitor version mismatch!!! ==========
========== Please use "show boot-monitor" command for details ==========
=========================================================================='

Which is expected because after this boot my device used the 10.1.14 boot code in the Primary Boot code area.

When I run show boot-monitor I see:

Stack unit 1:
Current Version : 10.1.14
Recommended Version: 10.1.18 (Mismatch)

And when I run show flash, I see:

Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 29360128, Version:08.0.90jT211 (SPS08090j.bin)
Compressed Sec Code size = 29360128, Version:08.0.90jT211 (SPS08090j.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.14T225 (mnz10114)
Compressed Sec Boot Code size = 786944, Version:10.1.18T225 (mnz10118)
Code Flash Free Space = 1155084288

So my question is - How do I get Compressed Sec Boot Code to Compressed Pri Boot Code? The copy command doesn't work. 😞

Did I miss something?

Trent

Re: Am I able to get my secondary boot code to primary?

corey_costello — Tue, 23 Mar 2021 21:31:42 GMT

You’ll have to set it in the bootrom.

https://m.youtube.com/watch?v=RHriOYYD_iI

Re: Am I able to get my secondary boot code to primary?

BenBeck — Tue, 23 Mar 2021 21:37:28 GMT

You should just be able to re-copy the SPS08090jufi.bin and reboot. The UFI contains the bootmon image.

Re: Am I able to get my secondary boot code to primary?

netwizz — Tue, 23 Mar 2021 21:52:14 GMT

The copy commands work just fine from privlege exec. Your switch boots, so just boot the secondary image and recopy the UFI ...

Re: Am I able to get my secondary boot code to primary?

sh_ruckus_rucku — Tue, 23 Mar 2021 22:01:42 GMT

Thanks all - The re-copy seems to have done it. Not sure if I used 'reload' instead of 'boot system flash primary' after the initial upload of 08090jufi.bin and if that had an impact. Current show flash after re-copy:

Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 29360128, Version:08.0.90jT211 (SPS08090j.bin)
Compressed Sec Code size = 29360128, Version:08.0.90jT211 (SPS08090j.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.18T225 (mnz10118)
Compressed Sec Boot Code size = 786944, Version:10.1.18T225 (mnz10118)
Code Flash Free Space = 1155063808

I believe it's all good. Thanks for the help.