topic Re: factory reset - CLI- No access to power in ICX Switches

factory reset - CLI- No access to power

abilashpr — Sat, 16 Feb 2019 07:27:20 GMT

Hi

We don't have access on power of switch, would like to know if there is Command to factory reset the ICX 7150 ?

Thank you,

Regards,
Abilash PR

Re: factory reset - CLI- No access to power

ravi_vatsavai — Sat, 16 Feb 2019 07:37:00 GMT

Hi,

If you have CLI access, then you can use 'erase starup-config' followed by a 'reload' command which will wipe out the configuration on the switch.
Thanks,
Ravi

Re: factory reset - CLI- No access to power

abilashpr — Sat, 16 Feb 2019 09:13:09 GMT

Thanks Ravi.

Re: factory reset - CLI- No access to power

ryan_guerrero_6 — Mon, 18 Feb 2019 04:26:49 GMT

Here is another way to do the same thing plus reset the password:

Reset Password

1. Press and hold Ctrl+y then release and push M then release and push Enter

2. Type “reset” at OS prompt

3. Press B (for monitor) keep pressing until you’re in monitor mode

4. Type – “no password” or to completely wipe type “use default-configuration”

5. To reboot type “boot or boot system flash primary”

Re: factory reset - CLI- No access to power

abilashpr — Mon, 18 Feb 2019 04:31:27 GMT

Thank you Ryan.

Re: factory reset - CLI- No access to power

netwizz — Tue, 19 Feb 2019 20:44:47 GMT

I will add...

If it comes from a stack configuration,

device# stack unconfigure all

or device# stack unconfigure me