Migration of AP's from vsz 5.1.1 to 3.5.1 issues

hilton_jonkers — Tue, 09 Jul 2019 12:31:58 GMT

Hi All..... I was trying to migrate AP's from vsz 5.1.1 to 3.5.1. it did not work of which i had to login to cli and set factory then set scg ip from default login super

Re: Migration of AP's from vsz 5.1.1 to 3.5.1 issues

abilash_pr_ir5b — Tue, 09 Jul 2019 12:40:13 GMT

Hi Hilton,

This is tricky and challenging using command "set scg ip <3.5.1 controller ip>" on the AP and deleting the APs from old controllers would work, if the AP numbers are more I would have those APs moved in one Zone and would run a AP-Cli script to do this, once the AP establishes connection to which ever controller it would try to upgrade the firmware that is available on the Zone.

I understand the method that you tried is harder.

Regards,
Abilash PR.

topic Re: Migration of AP's from vsz 5.1.1 to 3.5.1 issues in SmartZone and Virtual SmartZone

Migration of AP's from vsz 5.1.1 to 3.5.1 issues

Re: Migration of AP's from vsz 5.1.1 to 3.5.1 issues