snmpwalk not producing Ruckus vendor specific OIDs

hermanus_de_jag — Mon, 30 Mar 2020 07:50:39 GMT

Good Morning,

I am trying to setup snmp v2 monitoring on our vSZ, but I am not getting the Ruckus Vendor specific OIDs when doing an snmpwalk. Any ideas why not.

Command I use:

snmpwalk -v2c -c public 10.132.0.3 .1.3.6.1.4.1.25053.1.4.2.1.1.1.2.1.1

Then I get the following:

RUCKUS-ROOT-MIB::ruckusSZWLANModule.1.1.1.2.1.1 = No Such Object available on this agent

If I do a normal snmpwalk -v2c -c public 10.132.0.3 I also not seeing any Ruckus specific OIDs.

We are currently using the Ruckus vSZ-H version 5.1.2.0.302

Re: snmpwalk not producing Ruckus vendor specific OIDs

diego_garcia_de — Mon, 30 Mar 2020 18:54:13 GMT

Hi Hermanus,

Quick question. Is that targetting vSZ itself or the APs? im guessing its the SZ but just wanted to be sure. (The APs use different MIBs, actually they are hard to get but are basically de standalone)

topic snmpwalk not producing Ruckus vendor specific OIDs in SmartZone and Virtual SmartZone

snmpwalk not producing Ruckus vendor specific OIDs

Re: snmpwalk not producing Ruckus vendor specific OIDs