https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/How-to-show-all-clients-on-SmartZone-100-CLI/m-p/3477#M78 Hi everyone,<BR /><BR />We have some problem about how to show all clients which connected on SmartZone 100 by using CLI?<BR /><BR />We tried to using command "show client" but it must specify MAC address of client which we need to show.<BR /><BR />If we do not know the MAC address of all clients we cannot know who are connect with our network. I think it does not make sense.<BR /><BR />So please give me an advice.<BR /><BR />note: this case refer only CLI mode. Wed, 01 Apr 2015 11:01:09 GMT teeraphol_sukpr 2015-04-01T11:01:09Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/How-to-show-all-clients-on-SmartZone-100-CLI/m-p/3477#M78 Hi everyone,<BR /><BR />We have some problem about how to show all clients which connected on SmartZone 100 by using CLI?<BR /><BR />We tried to using command "show client" but it must specify MAC address of client which we need to show.<BR /><BR />If we do not know the MAC address of all clients we cannot know who are connect with our network. I think it does not make sense.<BR /><BR />So please give me an advice.<BR /><BR />note: this case refer only CLI mode. Wed, 01 Apr 2015 11:01:09 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/How-to-show-all-clients-on-SmartZone-100-CLI/m-p/3477#M78 teeraphol_sukpr 2015-04-01T11:01:09Z