Is there an SNMP trap in the SmartZone MIB that will show the number of connected APs?

drew_lentz_7550 — Mon, 28 Dec 2015 19:50:34 GMT

I am trying to configure PRTG to monitor a network and would like to see the total (count) number of APs currently connected. Also, is there a way to show total of Mesh APs and total of RAP?

Re: Is there an SNMP trap in the SmartZone MIB that will show the number of connected APs?

michael_brado — Tue, 29 Dec 2015 00:44:20 GMT

Looking at the OIDs in our SNMP MIBs, ruckusZDWLANAPInfo -> ruckusZDWLANAPTable -> ruckusZDWLANAPMeshType (1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.20) can tell Root AP from Mesh APs.

And ruckusZDWLANAPMeshHops (1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.19) can also identify MAPs from RAPs.

ruckusZDWLANAPInfo

ruckusZDWLANAPTable

ruckusZDWLANAPMacAddr1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.1

ruckusZDWLANAPDescription1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.2

ruckusZDWLANAPStatus1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.3

ruckusZDWLANAPModel1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.4

ruckusZDWLANAPSerialNumber1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.5

ruckusZDWLANAPUptime1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.6

ruckusZDWLANAPSWversion1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.7

ruckusZDWLANAPHWversion1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.8

ruckusZDWLANAPIPAddrMode1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.9

ruckusZDWLANAPIPAddr1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.10

ruckusZDWLANAPNumRadios1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.13

ruckusZDWLANAPNumVAP1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.14

ruckusZDWLANAPNumSta1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.15

ruckusZDWLANAPNumRogues1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.16

ruckusZDWLANAPConnectionMode1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.17

ruckusZDWLANAPMeshEnable1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.18

ruckusZDWLANAPMeshHops1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.19

ruckusZDWLANAPMeshType1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.20

topic Is there an SNMP trap in the SmartZone MIB that will show the number of connected APs? in SmartZone and Virtual SmartZone

Is there an SNMP trap in the SmartZone MIB that will show the number of connected APs?

Re: Is there an SNMP trap in the SmartZone MIB that will show the number of connected APs?