topic Report for less and most used Access Points in SmartZone and Virtual SmartZone

Report for less and most used Access Points

peter_riederer_ — Thu, 18 Dec 2025 08:32:28 GMT

Hey Folks,

is there a way to generate a report for less and most used Access Points in vSZ 6.1.2 ?

The available report types are very limited, and not what i want to get.

Thanks

Peter

Re: Report for less and most used Access Points

MA — Tue, 20 Jan 2026 13:12:12 GMT

Hi peter_riederer_,

Unfortunately, there is no such reports type. Could you confirm which parameters you would like to define for the most‑used AP?

Regards,

Modassir

Re: Report for less and most used Access Points

peter_riederer_ — Tue, 20 Jan 2026 13:17:22 GMT

We would like to generate a report of connected devices over specific time periods, so we can determine whether certain access points can be removed or relocated to areas with higher or denser usage

Re: Report for less and most used Access Points

MA — Tue, 20 Jan 2026 14:13:09 GMT

Hi peter_riederer_,

Please check if the following report helps.

Regards,

Modassir

Re: Report for less and most used Access Points

peter_riederer_ — Tue, 20 Jan 2026 14:30:35 GMT

It goes in this direction, but i have to select every single access point from the drop down list. While having over 200 APs it takes a lot of time 😞 Would be better being able to select an AP-Group e.g.