topic Is it a firmware version issue in SmartZone and Virtual SmartZone

Is it a firmware version issue

cangqingse — Mon, 19 May 2025 06:15:27 GMT

The current firmware version using Smartzone is 3.6.2

Web authentication is enabled, but some users frequently repeat the authentication process. After checking the logs, we found an error message below the error log. Can you tell if this is caused by a firmware version that is too low? What version of firmware do I need to use?

Error log:

2025-05-19T04:24:26 zbj C-SESSMGR[390]: [Mon May 19 2025 04:24:26:115][CP][C-SESSMGR][ERR][FID=1,apMac=34:8F:27:22:C4:B0,apIp=212.210.30.172,ueMac=7A:3C:6E:22:C5:90,ueIp=8.41.31.172,TID=-1904228608][memcached_wrapper.c:2110]#012MWL_RemoveEntry_StrKey - Delete Failed for the key:IUTBL_wangyongzhi, Reason: Code (16)- NOT FOUND

Re: Is it a firmware version issue

Ambika-leimapok — Tue, 20 May 2025 17:29:15 GMT

Hi Cangqingse,

May I know if affected SSID is using DPSK?

Re: Is it a firmware version issue

cangqingse — Wed, 21 May 2025 06:30:55 GMT

hello
I haven't activated DPSK on my end
Encryption Options：
We have selected None here

Re: Is it a firmware version issue

Ambika-leimapok — Thu, 22 May 2025 22:52:07 GMT

Hi Cangqingse,

Please let us know if the issue is seen only in one particular SSID.

The above would generate when the entry already being removed or never existing in the first place. You might need to verify the existence of the key before attempting to delete it.

If this SSID is authenticate against external Auth server, you would need to check on the Auth server side parallelly.