https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/2-x-SZ100-Controller-Cluster-How-to-assign-AP-s-to-Specific/m-p/12530#M586 Hi Robert,<BR alt="" name="" rel="" target="" title="" type="" value="" />That's the expected behavior. AFAIK it's not possible to specify an AP to stick to a node. From time to time the APs rebalance, there's even a button to rebalance APs between nodes. Fri, 04 Sep 2020 22:48:06 GMT javier_valdes_c 2020-09-04T22:48:06Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/2-x-SZ100-Controller-Cluster-How-to-assign-AP-s-to-Specific/m-p/12529#M585 Hi All, Have a 2 x SZ cluster where i would like them to work in more of an active/standby mode than an active/active scenario. Even if i reboot a controller to force all AP's over to the other, over time they will disperse over the cluster.&nbsp;<BR /><BR />Is there a way to tell an AP or a Zone to prioritise one controller over another? I've had a look around but cant see anything. Fri, 04 Sep 2020 14:50:57 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/2-x-SZ100-Controller-Cluster-How-to-assign-AP-s-to-Specific/m-p/12529#M585 robert_lowe_722 2020-09-04T14:50:57Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/2-x-SZ100-Controller-Cluster-How-to-assign-AP-s-to-Specific/m-p/12530#M586 Hi Robert,<BR alt="" name="" rel="" target="" title="" type="" value="" />That's the expected behavior. AFAIK it's not possible to specify an AP to stick to a node. From time to time the APs rebalance, there's even a button to rebalance APs between nodes. Fri, 04 Sep 2020 22:48:06 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/2-x-SZ100-Controller-Cluster-How-to-assign-AP-s-to-Specific/m-p/12530#M586 javier_valdes_c 2020-09-04T22:48:06Z