https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Automatic-gateway-detection-with-Client-isolation-in-FHRP/m-p/99683#M5764 <P><SPAN>I have redundant gateways for Wi-Fi users using FHRP.</SPAN></P><P><SPAN>Also, I have registered the IP addresses and MAC addresses of both FHRP's VIP and Active/Standby in the Isolation Whitelist.</SPAN></P><P><SPAN>This operation requires updating the WhiteList every time a gateway device breaks down or is replaced, which is cumbersome.</SPAN></P><P><SPAN>Is it possible to solve this problem by using Automatic gateway detection with Client isolation?</SPAN></P> Wed, 20 Nov 2024 11:43:09 GMT tomoya 2024-11-20T11:43:09Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Automatic-gateway-detection-with-Client-isolation-in-FHRP/m-p/99683#M5764 <P><SPAN>I have redundant gateways for Wi-Fi users using FHRP.</SPAN></P><P><SPAN>Also, I have registered the IP addresses and MAC addresses of both FHRP's VIP and Active/Standby in the Isolation Whitelist.</SPAN></P><P><SPAN>This operation requires updating the WhiteList every time a gateway device breaks down or is replaced, which is cumbersome.</SPAN></P><P><SPAN>Is it possible to solve this problem by using Automatic gateway detection with Client isolation?</SPAN></P> Wed, 20 Nov 2024 11:43:09 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Automatic-gateway-detection-with-Client-isolation-in-FHRP/m-p/99683#M5764 tomoya 2024-11-20T11:43:09Z