How to configure AP in mesh mode

bgh — Fri, 07 Jun 2024 09:17:45 GMT

Dear Ruckus,
My client requested to configure some access Point in Mesh mode

This was his initial request:

"APs to be configured mesh mode as follows (connected via PoE for configuration):

Ruckus R510 / MAC e81da8159d04 / SW03 port19"

But when I access that Switch 03 and search for this mac-address.
I did not find any AP anywhere in the switch

SW03# show mac-addr e81da8-159d04

Status and Counters - Address Table - e81da8-159d04

Port VLAN
----- ----

_______________________________________________________________________________

Please can some guide, how can i configure the AP in mesh mode.
we have Ruckus SmartZone 100

To configured the AP in mesh mode, Shouldn't the AP 1st be visible in the Switch ?

topic How to configure AP in mesh mode in SmartZone and Virtual SmartZone

How to configure AP in mesh mode