Does vSZ Support 2 Separate Network Interfaces

brent1993 — Thu, 23 May 2024 23:55:31 GMT

Hello guy

Is it possible to have 2 AP interfaces, 2 control interfaces, and 2 management interfaces on the same controller?

The end goal is to build a two separate network between the two separate control,AP and management interfaces.

Thank you

Re: Does vSZ Support 2 Separate Network Interfaces

Ayush_Tripathi — Sat, 25 May 2024 17:04:40 GMT

Hello @brent1993

You can create a separate interface for the Control, cluster & Management interface. There is no any AP interface on the controller, AP used the control interface to establish the SSH connection with controller.

There will be only one separate control, cluster and management interface.

Please refer the below community thread for the reference

https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/vSZ-H-explaination-of-interfaces/m-p/3959

Also please check the vSZ starting guide.

https://support.ruckuswireless.com/documents/2819-virtual-smartzone-getting-started-guide-vsz-vsz-d

topic Re: Does vSZ Support 2 Separate Network Interfaces in SmartZone and Virtual SmartZone

Does vSZ Support 2 Separate Network Interfaces

Re: Does vSZ Support 2 Separate Network Interfaces