https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Multicast-on-Zone-Director-3050/m-p/78268#M5034 <P>Hi,</P><P>I have been trying to get multicast working on our WiFi network. Here is a synopsis of the setup.<BR />A zone director 3050 running version 9.13.3.0 build 145. Managing mainly r600 APs with a few other models sprinkled in. There is an WLAN configured with a VLAN ID. The SSID is being broadcast. I can connect to the SSID and assign myself an ip address to get on the network. When on the network, I can reach other machines as expected. Now when I run a client on my machine (laptop) to view multicast video streaming from a camera server, I am not receiving the video.</P><P>To isolate certain points, I configured a standalone AP off the Zone Director (r600 firmware 110.0.0.0.675). Through this AP the multicast video streaming worked.</P><P>Back on the Zone Director, there is a setting enabled "tunnel mode" on the WLAN. This blocks multicast video streaming packets (per documentation). If I disable this, this breaks wireless communication on that network. I am not sure why though.</P><P>Following some other forums, I tried looking at directed-multicast, qos services, etc., but none of those worked. Any leads will help. Thanks.</P> Thu, 18 Apr 2024 13:31:50 GMT kransom 2024-04-18T13:31:50Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Multicast-on-Zone-Director-3050/m-p/78268#M5034 <P>Hi,</P><P>I have been trying to get multicast working on our WiFi network. Here is a synopsis of the setup.<BR />A zone director 3050 running version 9.13.3.0 build 145. Managing mainly r600 APs with a few other models sprinkled in. There is an WLAN configured with a VLAN ID. The SSID is being broadcast. I can connect to the SSID and assign myself an ip address to get on the network. When on the network, I can reach other machines as expected. Now when I run a client on my machine (laptop) to view multicast video streaming from a camera server, I am not receiving the video.</P><P>To isolate certain points, I configured a standalone AP off the Zone Director (r600 firmware 110.0.0.0.675). Through this AP the multicast video streaming worked.</P><P>Back on the Zone Director, there is a setting enabled "tunnel mode" on the WLAN. This blocks multicast video streaming packets (per documentation). If I disable this, this breaks wireless communication on that network. I am not sure why though.</P><P>Following some other forums, I tried looking at directed-multicast, qos services, etc., but none of those worked. Any leads will help. Thanks.</P> Thu, 18 Apr 2024 13:31:50 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Multicast-on-Zone-Director-3050/m-p/78268#M5034 kransom 2024-04-18T13:31:50Z