SNMP on SZ144

jacco_wout_kok — Fri, 04 Aug 2023 15:01:08 GMT

Hello everyone,

We want to use SNMP Agent from the SZ144 (Version 6.1.1.0.959) controller to read the status of the controller and the APs. However, I can't get this done.

I can't get any information from the controller through CheckMK or PRTG. Also, I can't find a custom MIB for this controller that I might need.

Do you have an idea?

Re: SNMP on SZ144

Parik_MN — Fri, 04 Aug 2023 16:54:35 GMT

Hello @jacco_wout_kok,

There are no specific SNMP MIBs for v6.1.1. You can make use of v6.1.0 MIBs as we have not made any changes to OIDs compatible with SZ. Navigate to below link to get SNMP user guide and MIBs access.

SNMP Reference Guide:

https://support.ruckuswireless.com/documents/4373-smartzone-6-1-1-lt-ga-snmp-reference-guide-sz100-vsz-e/download

SZ SNMP MIBs:

https://support.ruckuswireless.com/software_terms_and_conditions/3301-smartzone-6-1-0-0-935-ga-snmp-mibs-for-sz-100-and-vsz-e-zip

AP SNMP MIBs:

https://support.ruckuswireless.com/software_terms_and_conditions/3563-smartzone-6-1-1-lt-ga-snmp-mibs-for-access-points-zip

Regards,

Parik

topic Re: SNMP on SZ144 in SmartZone and Virtual SmartZone

SNMP on SZ144

Re: SNMP on SZ144